My Cart

Close

Tubeless Bicycle Tire Sealant 4 oz bottle

 

$7.00

ONE MFG Tubeless Tire Sealant.

Dual rubber formula greatly reduces tire "burps" and air loss. ONE MFG Tubeless Sealant does not contain plastic.  Natural rubber based, non-toxic, non-corrosive, non-hazardous and bio-degradable.  Formulated and manufactured in-house.

  • Seals punctures up to 1/4" (6.5mm) in seconds
  • Remains liquid and keeps sealing tires for 3-12 months for long-lasting protection. Dry climates and excess heat will require a sealant refresh sooner
  • Innovative low temperature formula will resists freezing well below zero
  • Biodegradable Formula
  • Can be injected through valve stems with removable cores
  • For with tubes and tubular tires

Use: MUST SHAKE WELL!  Pour Fast.  The easiest method of installing sealant into a tubeless ready tire (without a tire insert installed) is to first install tire on hoop, keeping a 4"-6" opening on one side of tire. Simply shake and pour the sealant and close up the tire. Rotate the tire to coat inside with sealant. Inflate most mountain bike tires to 40 lbs.  Rotate tire around again a few times to properly coat the inside of tire with sealant.  Let tire sit with higher air pressure until you are ready to use.  

Injector System: Remove valve core on valve stem. Check to make sure it's clean. Replace if necessary. Use a narrow zip tie or small screwdriver to poke the valve stem inside the tire making sure the valve stem is not clogged. Shake bottle and insert injector tube over lower portion of valve stem securely. Squeeze bottle to inject sealant into tire. Remove tube and replace the valve stem core. Rotate tire to coat inside with sealant. Inflate most mountain bike tires to 40 lbs. Rotate tire around again a few times to properly coat inside of tire with sealant.  Let tire sit with higher air pressure until you are ready to use.  

Adding sealant with tire insert installed: Injector System: Remove valve core on valve stem. Check to make sure its clean. Replace if necessary. Use a narrow zip tie or small screwdriver to poke and push down tire insert from close contact to the back of the valve stem inside the tire. Make sure there is space and the valve stem is not clogged. Squeeze tire insert and try to pull it away from the back of the valve stem. Shake bottle and insert injector tube over lower portion of valve stem securely. Squeeze bottle to inject sealant into tire. Remove tube and replace valve stem core. Rotate tire to coat inside with sealant. Inflate most mountain bike tires to 40 lbs.  Rotate tire around again a few times to properly coat inside of tire with sealant.  Let tire sit with higher air pressure until you are ready to use.  

Sealant Quantity Suggested Useage: 26" 2-3 oz / 27.5" 2.5-3 oz / 29" 3-4 oz

Size: 4oz.

 Caution: Use gloves.  Wash hands.  Wear safety glasses.  Wash with cold water if contact with eyes.  Do not ingest.  Keep all chemicals away from children and pets.

Made in the USA

Hello You!

Enter your email address for stock alerts, discounts, promotions and more!

SEARCH THIS STORE