One MFG Tubeless Bicycle Tire Sealant / High Performance / Dual Rubber - 8oz.

$13.00
ONE MFG Tubeless Tire Sealant.
Dual rubber formula greatly reduces tire "burps" and air loss. ONE MFG Tubeless Sealant does not contain plastic. Natural rubber based, non-toxic, non-corrosive, non-hazardous and bio-degradable. Formulated and manufactured in-house.
- Seals punctures up to 1/4" (6.5mm) in seconds
- Remains liquid and keeps sealing tires for 3-12 months for long-lasting protection. Dry climates and excess heat will require a sealant refresh sooner.
- Innovative low temperature formula will resist freezing well below zero.
- Biodegradable Formula.
- Can be injected through valve stems with removable cores.
- For with tubes and tubular tires.
Use: MUST SHAKE WELL! Pour fast. The easiest method of installing sealant into a tubeless-ready tire, (without a tire insert installed), is to first install tire on hoop, keeping a 4"- 6" opening on one side of tire. Simply shake and pour the sealant and close up the tire. Rotate the tire to coat inside with sealant. Inflate most mountain bike tires to 40 lbs. Rotate tire around again a few times to properly coat the inside of tire with sealant. Let tire sit with higher air pressure until you are ready to use.
Injector System: NOT INCLUDED WITH THIS ITEM. Remove valve core on valve stem. Check to make sure it's clean. Replace if necessary. Use a narrow zip tie or small screwdriver to poke the valve stem inside the tire, making sure the valve stem is not clogged. Shake bottle and insert injector tube over lower portion of valve stem securely. Squeeze bottle to inject sealant into tire. Remove tube and replace the valve stem core. Rotate tire to coat inside with sealant. Inflate most mountain bike tires to 40lbs. Rotate tire around again a few times to properly coat inside of tire with sealant. Let tire sit with higher air pressure until you are ready to use.
Adding sealant with tire insert installed: Injector System: Remove valve core on valve stem. Check to make sure it's clean. Replace if necessary. Use a narrow zip tie or small screwdriver to poke and push down tire insert from close contact to the back of the valve stem inside the tire. Make sure there is space and the valve stem is not clogged. Squeeze tire insert and try to pull it away from the back of the valve stem. Shake bottle and insert injector tube over lower portion of valve stem securely. Squeeze bottle to inject sealant into tire. Remove tube and replace valve stem core. Rotate tire to coat inside with sealant. Inflate most mountain bike tires to 40lbs. Rotate tire around again a few times to properly coat inside of tire with sealant. Let tire sit with higher air pressure until you are ready to use.
Sealant Quantity Suggested Useage: 26" 2 - 3oz / 27.5" 2.5 - 3oz / 29" 3 - 4oz.
Size: 8oz.