P-Tex Sticks for Snowboard Base Repair 6 Pieces

$5.40
There is nothing worse than a big rock gouge in the base of your board. Repair those deep gouges in your base of your ski or snowboard with our P-tex sticks. These P-tex repair sticks come in both clear and black colors and in two primary sizes of 8mm and 11mm. To repair your base you need to first make sure your base is clean of any wax. Use our base cleaner to prep the repair area. Then using a steel scraper or razor blade try and get the area around the gouge flat and clear of any frays of P-tex. Make sure it's a nice smooth surface to bond to. Then using a lighter, heat up the P-tex stick to where it's on fire like a candle, holding the stick at an angle so the material drips off the stick in to the gouge. Fill the gouge completely until it's flush with base. Too much is better than not enough. Let the material cool and then using a sharp razor blade- carefully cut any additional material that has filled the repair hole so the base is flush.
Colors: Black, Clear
Sizes: 8mm, 11mm
Quantity: 6 pieces per size
11mm P-tex sticks are primarily used for the base extruder gun.
More in this Collection

Citrus Base Cleaner Snowboard and ski base cleaner

Fibertex Pads

The Dude Snowboard/Ski Wax

4WD Bulk Snowboard Wax / Ski Wax

Hot Wax Tuning Kit

Magne-Traction File Tool

6 Inch Wax Scraper

Horse Hair Waxing Brush

Brass Waxing Brush

Waxing Cork

BIO GREEN BASE CLEANER Snowboard and ski wax and dirt remover

Walter Snowboard/Ski Wax

Nylon Waxing Brush

Beer Snowboard/Ski Wax

Edge Tool Large

Splitboard Skin Wax

Jesus Snowboard/Ski Wax

Steel Scraper
