Cork Bus Snowboard Stomp Pad

This eco-friendly snowboard stomp pad is made of cork. Hippy Bus artwork by local Pacific Northwest surf artist Todd Fischer from Westport, WA. Todd is a friend of Matt and Bryan. Matt commissioned Todd to do some artwork a number of years ago for a couple of his pro models. Visit his gallery in Westport or Port Angeles the next time you go surfing.

This cork traction pad is an eco-friendly way to keep your foot on your board. Even though it is made of cork, it's long lasting and will stay stuck in place due do the proprietary waterproof adhesive used.

Keep your foot where it should be. For extra traction getting off chair lifts and when riding with only one foot strapped in. 

We produce this pad in our Belfair Factory!

Size: 7" x 3.5"

Instructions:

1. Clean board surface and dry completely. Use ONE MFG Base Cleaner, rubbing alcohol, or another solvent may be needed to get off dirt. Let the solvent dry for 10 minutes.

2. Mark area where pad will be placed with pencil first. Peel off backing of pad. Place stomp pad in front of your back foot binding and center edge to edge.

3. Only stick once, do not move, making sure not to damage adhesive. Use your fingers to press on pad with firm pressure. Use a hair dryer or heat source to help the pad stick if you want.

4. Let stomp pad adhere to board for a minimum of 12 hours before using. Better yet, bring your board inside your home and let the stomp pads rest overnight.

Instructions: 

1. Clean board surface and dry completely. Use ONE MFG Base Cleaner, rubbing alcohol, or another solvent may be needed to get off dirt. Let the solvent dry for 10 minutes. 

2. Mark area where pad will be placed with pencil first. Peel off backing of pad. Place stomp pad in front of your back foot binding and center edge to edge.

3. Only stick once, do not move, making sure not to damage adhesive. Use your fingers to press on pad with firm pressure. Use a hair dryer or heat source to help the pad stick if you want. 

4. Let stomp pad adhere to board for a minimum of 12 hours before using. Better yet, bring your board inside your home and let the stomp pads rest overnight.